临时提交

BPASmartClient.CustomResource/Pages/Model/AlarmInfo.cs

@@ -12,45 +12,48 @@ namespace BPASmartClient.CustomResource.Pages.Model
         {
 
         }
+       
         /// <summary>
         /// 1 号滚筒线故障
         /// </summary>
-        [Alarm("【1】号滚筒线运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【1】号滚筒线运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort LOneRollerTrouble { get; set; }
         /// <summary>
         /// 2 号滚筒线故障
         /// </summary>
-        [Alarm("【2】号滚筒线运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【2】号滚筒线运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort LTwoRollerTrouble { get; set; }
         /// <summary>
         /// 3 号滚筒线故障
         /// </summary>
-        [Alarm("【3】号滚筒线运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【3】号滚筒线运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort LThreeRollerTrouble { get; set; }
         /// <summary>
         /// 1 号炒锅滚筒运行故障
         /// </summary>
-        [Alarm("【1】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【1】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort FryPotOneRollerTrouble { get; set; }
         /// <summary>
         ///  2 号炒锅滚筒运行故障
         /// </summary>
-        [Alarm("【2】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【2】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort FryPotTwoRollerTrouble { get; set; }
         /// <summary>
         ///  3 号炒锅滚筒运行故障
         /// </summary>
-        [Alarm("【3】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【3】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort FryPotThreeRollerTrouble { get; set; }
         /// <summary>
         ///  4 号炒锅滚筒运行故障
         /// </summary>
-        [Alarm("【4】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【4】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort FryPotFourRollerTrouble { get; set; }
         /// <summary>
         ///  5 号炒锅滚筒运行故障
         /// </summary>
-        [Alarm("【5】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.一般报警)]
+        [Alarm("【5】号炒锅滚筒运行故障", AlarmTriggerType.Rising, AlarmLevel.严重报警)]
         public ushort FryPotFiveRollerTrouble { get; set; }
+
+        
     }
 }

FryPot_DosingSystem/App.xaml.cs

@@ -39,7 +39,7 @@ namespace FryPot_DosingSystem
                 mv.Show();
                 DeviceOperate deviceOperate = DeviceOperate.GetInstance;//开启实时PLC数据读取
                 DosingLogicControl logigControl = DosingLogicControl.GetInstance;//开启逻辑控制任务程序
-                HubHelper.GetInstance.Connect("192.168.1.14", 8089);
+                HubHelper.GetInstance.Connect("192.168.1.40", 8089);
                 AlarmHelper<AlarmInfo>.Init();
             }
             else

FryPot_DosingSystem/Control/DosingLogicControl.cs

@@ -217,6 +217,39 @@ namespace FryPot_DosingSystem.Control
                     MessageLog.GetInstance.ShowRunLog($"提示：AGV任务下发失败，错误码:{errorCode}");
                 }
             }), "AgvDebug");
+
+            ActionManage.GetInstance.Register(() =>
+            {
+                MessageLog.GetInstance.ShowRunLog("清洗台卸桶完成");
+
+            }, "AgvArriveCleanPlateLocCom");
+
+            ActionManage.GetInstance.Register(() =>
+            {
+                MessageLog.GetInstance.ShowRunLog("4号线卸桶完成");
+
+            }, "AgvArriveLineFourLocCom");
+            ActionManage.GetInstance.Register(() =>
+            {
+                MessageLog.GetInstance.ShowRunLog("清洗台空桶装载完成");
+
+            }, "AgvArriveCleanPlateLocLoadCom");
+
+            ActionManage.GetInstance.Register(() => 
+            {
+                globalVar.rollerLineOne.RecipeCompleteSingle = 1;
+                
+            }, "LineOneRecipeComSignal");
+            ActionManage.GetInstance.Register(() =>
+            {
+                globalVar.rollerLineTwo.RecipeCompleteSingle = 1;
+
+            }, "LineTwoRecipeComSignal");
+            ActionManage.GetInstance.Register(() =>
+            {
+                globalVar.rollerLineThree.RecipeCompleteSingle = 1;
+
+            }, "LineThreeRecipeComSignal");
             ActionManage.GetInstance.Register(new Action(() =>
             {
                 globalVar.agvArriveLineOneLoadCom = true;
@@ -641,7 +674,6 @@ namespace FryPot_DosingSystem.Control
             Upstreamrequest objData = JsonConvert.DeserializeObject<Upstreamrequest>(obj.ToString());
             if (objData != null)
             {
-
                 #region 线体到炒锅
                 //线体1请求上下料
                 if (objData.robotJobId == LOnerobotJobId && objData.command == "LOAD")//同一任务号且处于上料阶段，AGV请求上料
@@ -1027,24 +1059,28 @@ namespace FryPot_DosingSystem.Control
 
                 if (objData.state == "DONE" && objData.robotJobId == LSevenrobotJobId && objData.jobData.startPointCode == "" && objData.jobData.targetPointCode == "")//指定下料位置下料完成，指从线体1到清戏台空桶下料
                 {
+                    MessageLog.GetInstance.ShowRunLog("清洗台卸桶完成");
                     AgvViewModel.GetInstance().Set小车运动(4, AgvViewModel.GetInstance().GetCommandValue("hj"));
                     AgvViewModel.GetInstance().Set小车停止(4);
                     AgvViewModel.GetInstance().Set停车桩(4, IsBool.Yes);
                 }
                 if (objData.state == "DONE" && objData.robotJobId == LEightrobotJobId && objData.jobData.startPointCode == "" && objData.jobData.targetPointCode == "")//指定下料位置下料完成，指从线体2到清戏台空桶下料
                 {
+                    MessageLog.GetInstance.ShowRunLog("清洗台卸桶完成");
                     AgvViewModel.GetInstance().Set小车运动(4, AgvViewModel.GetInstance().GetCommandValue("hj"));
                     AgvViewModel.GetInstance().Set小车停止(4);
                     AgvViewModel.GetInstance().Set停车桩(4, IsBool.Yes);
                 }
                 if (objData.state == "DONE" && objData.robotJobId == LNinerobotJobId && objData.jobData.startPointCode == "" && objData.jobData.targetPointCode == "")//指定下料位置下料完成，指从线体3到清戏台空桶下料
                 {
+                    MessageLog.GetInstance.ShowRunLog("清洗台卸桶完成");
                     AgvViewModel.GetInstance().Set小车运动(4, AgvViewModel.GetInstance().GetCommandValue("hj"));
                     AgvViewModel.GetInstance().Set小车停止(4);
                     AgvViewModel.GetInstance().Set停车桩(4, IsBool.Yes);
                 }
                 if (objData.state == "ROLLER_LOAD_FINISH" && objData.robotJobId == LTenrobotJobId && objData.jobData.startPointCode == "" && objData.jobData.targetPointCode == "")//指定上料位置上料完成，指清戏台空桶到上料
                 {
+                    MessageLog.GetInstance.ShowRunLog("清洗台空桶装载完成");
                     AgvViewModel.GetInstance().Set小车是否承载物品(4, IsBool.OnllYes);
                     AgvViewModel.GetInstance().Set小车运动(4, CartMotionTrajectory.hs_4);//去四号空桶线
 
@@ -1065,6 +1101,7 @@ namespace FryPot_DosingSystem.Control
 
                 if (objData.state == "DONE" && objData.robotJobId == LTenrobotJobId && objData.jobData.startPointCode == "" && objData.jobData.targetPointCode == "")//指定下料位置下料完成，指清戏台空桶到线体4下料
                 {
+                    MessageLog.GetInstance.ShowRunLog("【4】号线空桶回桶完成");
                     AgvViewModel.GetInstance().Set小车运动(4, AgvViewModel.GetInstance().GetCommandValue("hj"));
                     AgvViewModel.GetInstance().Set小车停止(4);
                     AgvViewModel.GetInstance().Set停车桩(4, IsBool.Yes);
@@ -1355,6 +1392,11 @@ namespace FryPot_DosingSystem.Control
 
                     globalVar.CleadBarrelEnterSingle = data[0];
                 }));
+                GetAddressData("2076", new Action<ushort[]>(data =>
+                {
+                    globalVar.CleanComplete = data[0];//洗桶出桶agv呼叫信号
+
+                }));
                 GetAddressData("D2077", new Action<ushort[]>(data =>
                 {
 
@@ -1959,10 +2001,11 @@ namespace FryPot_DosingSystem.Control
             if (globalVar.agvArriveCleanLoad)
             {
                 globalVar.agvArriveCleanLoad = false;
+                WritePlcData("D1066", 1);//AGV空桶出桶就位信号下发PlC
                 MessageLog.GetInstance.ShowRunLog("AGV到达清洗台空桶上料位置");
-                MessageLog.GetInstance.ShowRunLog("清洗台空桶装载完成");
+                // MessageLog.GetInstance.ShowRunLog("清洗台空桶装载完成");
                 AgvViewModel.GetInstance().SetCleanRollerNum(--CleanNum);
-                AgvViewModel.GetInstance().Set小车是否承载物品(4,IsBool.OnllYes);
+                AgvViewModel.GetInstance().Set小车是否承载物品(4, IsBool.OnllYes);
                 AgvViewModel.GetInstance().Set小车运动(4, CartMotionTrajectory.qxt_4);
             }
         }
@@ -2055,7 +2098,7 @@ namespace FryPot_DosingSystem.Control
                 }
             }
         }
-       
+
         /// <summary>
         /// AGV到达清洗台下料位置
         /// </summary>
@@ -2065,12 +2108,13 @@ namespace FryPot_DosingSystem.Control
             {
                 globalVar.agvArriveCleanUnLoad = false;
                 MessageLog.GetInstance.ShowRunLog("空桶到达清洗位置，准备卸桶");
-                MessageLog.GetInstance.ShowRunLog("卸桶完成");
                 AgvViewModel.GetInstance().Set小车是否承载物品(4, IsBool.No);
                 AgvViewModel.GetInstance().Set小车运动(4, CartMotionTrajectory.qxt_hj);
                 AgvViewModel.GetInstance().Set停车桩(4, IsBool.Yes);
                 AgvViewModel.GetInstance().SetCleanRollerNum(++CleanNum);
                 //plc交互
+                WritePlcData("D1065", 1);//AGV空桶洗桶就位信号下发PLC
+                                         // MessageLog.GetInstance.ShowRunLog("卸桶完成");
             }
         }
 
@@ -2100,8 +2144,9 @@ namespace FryPot_DosingSystem.Control
         /// <exception cref="NotImplementedException"></exception>
         private void LThreeRecipeDataToPlc()
         {
-            if (LThreeOutputMaterialQuene.Count == 0 && LThreeInputMaterialQuene.Count == 0 && !LThreeErrorRecipe)
+            if (LThreeOutputMaterialQuene.Count == 0 && LThreeInputMaterialQuene.Count == 0 && !LThreeErrorRecipe&&globalVar.rollerLineThree.RecipeCompleteSingle==1)
             {
+                globalVar.rollerLineThree.RecipeComMidSingle = 1;
                 if (globalVar.LThreeCurrentRecipeName != string.Empty)
                 {
                     MessageLog.GetInstance.ShowUserLog($"【3】号滚筒线【{globalVar.LThreeCurrentRecipeName}】 配方制作完成");
@@ -2120,7 +2165,7 @@ namespace FryPot_DosingSystem.Control
                     Task.Run(() => { Thread.Sleep(1500); fryThreeRecipe = string.Empty; });
                 }
             }
-            if (LThreeRecipeQuene.Count > 0 && LThreeOutputMaterialQuene.Count == 0 && LThreeInputMaterialQuene.Count == 0)//后续添加其它限制条件
+            if (LThreeRecipeQuene.Count > 0 && LThreeOutputMaterialQuene.Count == 0 && LThreeInputMaterialQuene.Count == 0&&globalVar.rollerLineThree.RecipeComMidSingle==1)//后续添加其它限制条件
             {
                 Application.Current.Dispatcher.Invoke(new Action(() => { AgvViewModel.GetInstance().wokModel_3.goodsName = string.Empty; }));
                 Application.Current.Dispatcher.Invoke(new Action(() => { AgvViewModel.GetInstance().wokModel_3.workflows = new ObservableCollection<WorkflowModel>(); }));
@@ -2161,7 +2206,7 @@ namespace FryPot_DosingSystem.Control
                         }
                     }
                     DeviceOperate.GetInstance.WritePlcData("D1043", (ushort)result.materialCollection.Count);//发送3号滚筒线工序数据
-                                                                                                             //AgvViewModel.GetInstance().Set启动或停止炒锅(globalVar.LThreeFryPotSerial, IsRun.Stop);
+                    globalVar.rollerLineThree.RecipeComMidSingle = 0;                                                                                       
                 }
             }
 
@@ -2174,8 +2219,9 @@ namespace FryPot_DosingSystem.Control
         /// <exception cref="NotImplementedException"></exception>
         private void LTwoRecipeDataToPlc()
         {
-            if (LTwoOutputMaterialQuene.Count == 0 && LTwoInputMaterialQuene.Count == 0 && !LTwoErrorRecipe)
+            if (LTwoOutputMaterialQuene.Count == 0 && LTwoInputMaterialQuene.Count == 0 && !LTwoErrorRecipe&&globalVar.rollerLineTwo.RecipeCompleteSingle == 1)
             {
+                globalVar.rollerLineTwo.RecipeComMidSingle = 1;
                 if (globalVar.LTwoCurrentRecipeName != string.Empty)
                 {
                     MessageLog.GetInstance.ShowUserLog($"【2】号滚筒线【{globalVar.LTwoCurrentRecipeName}】 配方制作完成");
@@ -2206,7 +2252,7 @@ namespace FryPot_DosingSystem.Control
                 }
             }
 
-            if (LTwoRecipeQuene.Count > 0 && LTwoOutputMaterialQuene.Count == 0 && LTwoInputMaterialQuene.Count == 0)//后续添加其它限制条件
+            if (LTwoRecipeQuene.Count > 0 && LTwoOutputMaterialQuene.Count == 0 && LTwoInputMaterialQuene.Count == 0 && globalVar.rollerLineTwo.RecipeComMidSingle== 1)//后续添加其它限制条件
             {
                 if (globalVar.LTwoFryPotSerial == 2)
                 {
@@ -2263,7 +2309,7 @@ namespace FryPot_DosingSystem.Control
                         }
                     }
                     DeviceOperate.GetInstance.WritePlcData("D1026", (ushort)result.materialCollection.Count);//发送2号滚筒线工序数据
-
+                    globalVar.rollerLineTwo.RecipeComMidSingle = 0;
                 }
             }
 
@@ -2276,8 +2322,9 @@ namespace FryPot_DosingSystem.Control
         /// </summary>
         private void LOneRecipeDataToPlc()
         {
-            if (OutputMaterialQuene.Count == 0 && InputMaterialQuene.Count == 0 && !ErrorRecipe)
+            if (OutputMaterialQuene.Count == 0 && InputMaterialQuene.Count == 0 && !ErrorRecipe&&globalVar.rollerLineOne.RecipeCompleteSingle==1)
             {
+                globalVar.rollerLineOne.RecipeComMidSingle = 1;
                 if (globalVar.LOneCurrentRecipeName != string.Empty)
                 {
                     MessageLog.GetInstance.ShowUserLog($"【1】号滚筒线【{globalVar.LOneCurrentRecipeName}】 配方制作完成");
@@ -2307,7 +2354,7 @@ namespace FryPot_DosingSystem.Control
                     Task.Run(() => { Thread.Sleep(1500); fryOneRecipe = string.Empty; fryFourRecipe = string.Empty; });
                 }
             }
-            if (RecipeQuene.Count > 0 && OutputMaterialQuene.Count == 0 && InputMaterialQuene.Count == 0)//后续添加其它限制条件
+            if (RecipeQuene.Count > 0 && OutputMaterialQuene.Count == 0 && InputMaterialQuene.Count == 0&&globalVar.rollerLineOne.RecipeComMidSingle==1)//后续添加其它限制条件
             {
                 if (globalVar.LOneFryPotSerial == 1)
                 {
@@ -2362,7 +2409,7 @@ namespace FryPot_DosingSystem.Control
                         }
                     }
                     DeviceOperate.GetInstance.WritePlcData("D1009", (ushort)result.materialCollection.Count);//发送1号滚筒线工序数据
-
+                    globalVar.rollerLineOne.RecipeComMidSingle = 0;//配方完成的中转信号置0
                 }
             }
 
@@ -2569,11 +2616,13 @@ namespace FryPot_DosingSystem.Control
                 AgvArriveFryPotOneOrFourSingleSetDown();
                 globalVar.agvArriveUnLoad = false;
                 globalVar.PotOneInputMaterialArrive = true;
+                FryPotOneRollerTroubleCheck();
             }
         }
 
         public void LOneFallMaterial()
         {
+
             if (!globalVar.InOrOutputLock && (globalVar.fryPotOne.InputMaterialArrivedSingle == 1 || globalVar.fryPotFour.InputMaterialArrivedSingle == 1) && globalVar.PotOneInputMaterialArrive && OutputMaterialQuene.Count > 0 && !globalVar.PotOneOutputRollerArrive)
             {
                 //if (globalVar.LOneFryPotSerial == 1)
@@ -2586,7 +2635,7 @@ namespace FryPot_DosingSystem.Control
                 //    Sqlite<PotFourStatus>.GetInstance.Base.Add(new PotFourStatus { Temperature = FryPotMonitorManage.GetInstance.fryFour.Temperature, HotPower = FryPotMonitorManage.GetInstance.fryFour.HotPower, Speed = FryPotMonitorManage.GetInstance.fryFour.Speed, FryPotWeight = FryPotMonitorManage.GetInstance.fryFour.FryPotWeight, OilCapacity = FryPotMonitorManage.GetInstance.fryFour.OilCapacity, TotalOilCapactiy = FryPotMonitorManage.GetInstance.fryFour.TotalOilCapactiy, TotalProduct = FryPotMonitorManage.GetInstance.fryFour.TotalProduct, Time = DateTime.Now.ToShortDateString() });//向表中新增数据
                 //    Sqlite<PotFourStatus>.GetInstance.Save();//保存数据
                 //}
-                FryPotOneRollerTroubleCheck();
+                //FryPotOneRollerTroubleCheck();
                 if (FryPotAlarm == 1 || FryPotFourAlarm == 1)//炒锅滚筒无故障
                 {
                     if (globalVar.LOneFryPotSerial == 1)
@@ -2607,6 +2656,7 @@ namespace FryPot_DosingSystem.Control
                     globalVar.PotOneOutputRollerArrive = true;
                 }
             }
+
         }
         /// <summary>
         /// 线体2的AGV从炒锅送料位置到倒料过程处理
@@ -2751,14 +2801,16 @@ namespace FryPot_DosingSystem.Control
                 AgvArriveFryPotOneOrFourOutEmptyRollerSingleSetDown();//暂时考虑agv送完料后原地等待，不加条件，直接发送到位信号
                 globalVar.agvArriveUpLoad = false;
                 globalVar.AgvArrivePot = true;
+                FryPotOneRollerTroubleCheck();
             }
         }
         public void LOneEmptyOperate()
         {
+
             if ((globalVar.fryPotOne.EmptyBarrelArrivedSingle == 1 || globalVar.fryPotFour.EmptyBarrelArrivedSingle == 1) && OutputMaterialQuene.Count > 0 && globalVar.AgvArrivePot)
             {
 
-                FryPotOneRollerTroubleCheck();
+                // FryPotOneRollerTroubleCheck();
                 if (FryPotAlarm == 1 || FryPotFourAlarm == 1)//无故障
                 {
                     if (globalVar.agvFryPotEmptyRollerArrive)
@@ -2792,6 +2844,7 @@ namespace FryPot_DosingSystem.Control
                 }
             }
 
+
         }
 
         /// <summary>
@@ -2903,12 +2956,13 @@ namespace FryPot_DosingSystem.Control
             {
                 globalVar.agvArriveLineFour = false;
                 //线体四信号交互
+                WritePlcData("D1067", 1);//AGV空桶回桶就位信号下发PLC
                 MessageLog.GetInstance.ShowRunLog("AGV到达【4】号回收线体，准备卸桶");
-                MessageLog.GetInstance.ShowRunLog("卸桶完成");
-                AgvViewModel.GetInstance().Set滚筒线状态(4,IsRun.Start);
+                // MessageLog.GetInstance.ShowRunLog("卸桶完成");
+                AgvViewModel.GetInstance().Set滚筒线状态(4, IsRun.Start);
                 AgvViewModel.GetInstance().Set滚筒线上数量(4, (++globalVar.LFourRollerNum).ToString());
-                AgvViewModel.GetInstance().Set小车是否承载物品(4,IsBool.No);
-                AgvViewModel.GetInstance().Set小车运动(4,CartMotionTrajectory.hj);
+                AgvViewModel.GetInstance().Set小车是否承载物品(4, IsBool.No);
+                AgvViewModel.GetInstance().Set小车运动(4, CartMotionTrajectory.hj);
                 AgvViewModel.GetInstance().Set停车桩(4, IsBool.Yes);
             }
         }
@@ -4086,7 +4140,16 @@ namespace FryPot_DosingSystem.Control
             switch (OutputMaterialQuene.ElementAt(0).materialType.MaterialLoc / 100)
             {
                 case 1:
-                    if (AlarmHelper<AlarmInfo>.Alarm.FryPotOneRollerTrouble == 1) { FryPotAlarm = -1; MessageLog.GetInstance.ShowRunLog("警告：炒锅【1】输送滚筒发生故障"); } else { FryPotAlarm = 1; return; } while (AlarmHelper<AlarmInfo>.Alarm.FryPotOneRollerTrouble == 1)
+                    if (AlarmHelper<AlarmInfo>.Alarm.FryPotOneRollerTrouble == 1)
+                    {
+                        FryPotAlarm = -1; MessageLog.GetInstance.ShowRunLog("警告：炒锅【1】输送滚筒发生故障");
+                    }
+                    else
+                    {
+                        FryPotAlarm = 1; return;
+
+                    }
+                    while (AlarmHelper<AlarmInfo>.Alarm.FryPotOneRollerTrouble == 1)
                     {
                         Thread.Sleep(5); if (globalVar.ExitLineOneTask)
                             return;

FryPot_DosingSystem/Control/GlobalVariable.cs

@@ -58,7 +58,7 @@ namespace FryPot_DosingSystem.Control
         /// </summary>
         public  ushort PlcInite { get; set; }
         /// <summary>
-        /// 清洗台清洗完成信号
+        /// 清洗台清洗完成信号/洗桶出桶AGV呼叫信号
         /// </summary>
         public ushort CleanComplete { get; set; }
         #region 上位机内部逻辑条件
@@ -250,6 +250,10 @@ namespace FryPot_DosingSystem.Control
         /// </summary>
         public ushort RecipeCompleteSingle { get; set; }
         /// <summary>
+        /// 当前配方完成的中转信号
+        /// </summary>
+        public ushort RecipeComMidSingle { get; set; } = 1;
+        /// <summary>
         /// 线体1上空桶确认信号
         /// </summary>
         public ushort EmptyRollerConfirmSingle { get; set; }
@@ -318,7 +322,10 @@ namespace FryPot_DosingSystem.Control
         /// 当前线体配方完成信号
         /// </summary>
         public ushort RecipeCompleteSingle { get; set; }
-
+        /// <summary>
+        /// 当前配方完成的中转信号
+        /// </summary>
+        public ushort RecipeComMidSingle { get; set; } = 1;
         /// <summary>
         /// 线体1上空桶确认信号
         /// </summary>
@@ -387,7 +394,10 @@ namespace FryPot_DosingSystem.Control
         /// 当前线体配方完成信号
         /// </summary>
         public ushort RecipeCompleteSingle { get; set; }
-
+        /// <summary>
+        /// 当前配方完成的中转信号
+        /// </summary>
+        public ushort RecipeComMidSingle { get; set; } = 1;
         /// <summary>
         /// 线体1上空桶确认信号
         /// </summary>
@@ -457,8 +467,11 @@ namespace FryPot_DosingSystem.Control
         /// 当前线体配方完成信号
         /// </summary>
         public ushort RecipeCompleteSingle { get; set; }
+        /// <summary>
+        /// 当前配方完成的中转信号
+        /// </summary>
+        public ushort RecipeComMidSingle { get; set; } = 1;
 
-        
     }
     /// <summary>
     /// 炒锅1相关变量

FryPot_DosingSystem/View/DebugView.xaml

@@ -39,6 +39,7 @@
                         <ComboBox SelectionChanged="ComboBox_SelectionChanged" ItemsSource="{Binding LineOneRollerCode}" Background="Transparent" Width="100" Height="34" Margin="3,3"/>
                         <Button Content="炒锅进料就位" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding FryPotInputArrive}"/>
                         <Button Content="炒锅空桶就位" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding FryPotEmptyRollerArrive}"/>
+                    <Button Content="配方完成信号" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding LineOneRecipeComSignal}"/>
                     <Line Stroke="Aqua" StrokeThickness="2" X1="0" X2="860" Y1="0" Y2="0"/>
                     <Button Content="线体1任务重置" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding LineOneTaskExit}"></Button>
                     <Button Content="AGV接口调试" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvDebug}"/>
@@ -65,9 +66,11 @@
                         <Button Content="AGV线体1空桶上料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineOneEmptyRollerLoc}"/>
                         <Button Content="AGV线体1空桶上料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvLineOneLoadEmptyCom}"/>
                         <Button Content="AGV空桶清洗下料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLoc}"/>
+                        <Button Content="AGV空桶清洗下料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocCom}"/>
                         <Button Content="AGV空桶清洗上料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocLoad}"/>
+                        <Button Content="AGV空桶清洗上料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocLoadCom}"/>
                         <Button Content="AGV线体4空桶下料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineFourLoc}"/>
-                        
+                        <Button Content="AGV线体4空桶下料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineFourLocCom}"/>
                     </WrapPanel>
                 </WrapPanel>
                
@@ -82,6 +85,7 @@
                     <ComboBox SelectionChanged="ComboBox_SelectionChanged_1" ItemsSource="{Binding LineTwoRollerCode}" Background="Transparent" Width="100" Height="34" Margin="3,3"/>
                     <Button Content="炒锅进料就位" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding FryPotTwoInputArrive}"/>
                     <Button Content="炒锅空桶就位" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding FryPotTwoEmptyRollerArrive}"/>
+                    <Button Content="配方完成信号" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding LineTwoRecipeComSignal}"/>
                     <Line Stroke="Aqua" StrokeThickness="2" X1="0" X2="860" Y1="0" Y2="0"/>
                     <Button Content="线体2任务重置" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding LineTwoTaskExit}"></Button>
                     <Line Stroke="Aqua" StrokeThickness="2" X1="0" X2="860" Y1="0" Y2="0"/>
@@ -103,9 +107,11 @@
                         <Button Content="AGV线体2空桶上料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineTwoEmptyRollerLoc}"/>
                         <Button Content="AGV线体2空桶上完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvLineTwoLoadEmptyCom}"/>
                         <Button Content="AGV空桶清洗下料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLoc}"/>
+                        <Button Content="AGV空桶清洗下料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocCom}"/>
                         <Button Content="AGV空桶清洗上料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocLoad}"/>
+                        <Button Content="AGV空桶清洗上料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocLoadCom}"/>
                         <Button Content="AGV线体4空桶下料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineFourLoc}"/>
-                        
+                        <Button Content="AGV线体4空桶下料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineFourLocCom}"/>
                     </WrapPanel>
                 </WrapPanel>
             </GroupBox>
@@ -118,6 +124,7 @@
                     <ComboBox SelectionChanged="ComboBox_SelectionChanged_2" ItemsSource="{Binding LineThreeRollerCode}" Background="Transparent" Width="100" Height="34" Margin="3,3"/>
                     <Button Content="炒锅进料就位" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding FryPotThreeInputArrive}"/>
                     <Button Content="炒锅空桶就位" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding FryPotThreeEmptyRollerArrive}"/>
+                    <Button Content="配方完成信号" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding LineThreeRecipeComSignal}"/>
                     <Line Stroke="Aqua" StrokeThickness="2" X1="0" X2="860" Y1="0" Y2="0"/>
                     <Button Content="线体3任务重置" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding LineThreeTaskExit}"></Button>
                     <Line Stroke="Aqua" StrokeThickness="2" X1="0" X2="860" Y1="0" Y2="0"/>
@@ -139,9 +146,11 @@
                         <Button Content="AGV线体3空桶上料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineThreeEmptyRollerLoc}"/>
                         <Button Content="AGV线体3空桶上料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvLineThreeLoadEmptyCom}"/>
                         <Button Content="AGV空桶清洗下料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLoc}"/>
+                        <Button Content="AGV空桶清洗下料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocCom}"/>
                         <Button Content="AGV空桶清洗上料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocLoad}"/>
+                        <Button Content="AGV空桶清洗上料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveCleanPlateLocLoadCom}"/>
                         <Button Content="AGV线体4空桶下料就位" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineFourLoc}"/>
-                       
+                        <Button Content="AGV线体4空桶下料完成" Width="145" Style="{StaticResource buttonStyle}" VerticalAlignment="Top" Command="{Binding AgvArriveLineFourLocCom}"/>
                     </WrapPanel>
                 </WrapPanel>
             </GroupBox>

FryPot_DosingSystem/View/MainWindow.xaml.cs

@@ -40,7 +40,7 @@ namespace FryPot_DosingSystem.View
                 var res = JsonConvert.DeserializeObject<Upstreamrequest>(o.ToString());
             });
 
-            HubHelper.GetInstance.Connect("192.168.1.56", 8089);
+            HubHelper.GetInstance.Connect("192.168.1.40", 8089);
         }
 
         protected override void OnMouseLeftButtonDown(MouseButtonEventArgs e)

FryPot_DosingSystem/ViewModel/DebugViewModel.cs

@@ -22,7 +22,7 @@ namespace FryPot_DosingSystem.ViewModel
         public RelayCommand FryPotInputArrive { get; set; }
         public RelayCommand FryPotEmptyRollerArrive { get; set; }
         public RelayCommand LineOneTaskExit { get; set; }
-
+        public RelayCommand LineOneRecipeComSignal { get; set; }
 
         public RelayCommand AGVLOneArrive { get; set; }
         public RelayCommand AGVFryPotDownArrive { get; set; }
@@ -36,7 +36,7 @@ namespace FryPot_DosingSystem.ViewModel
         public RelayCommand FryPotTwoInputArrive { get; set; }
         public RelayCommand FryPotTwoEmptyRollerArrive { get; set; }
         public RelayCommand LineTwoTaskExit { get; set; }
-
+        public RelayCommand LineTwoRecipeComSignal { get; set; }
 
         public RelayCommand AGVLTwoArrive { get; set; }
         public RelayCommand AGVFryPotTwoDownArrive { get; set; }
@@ -49,6 +49,7 @@ namespace FryPot_DosingSystem.ViewModel
         public RelayCommand FryPotThreeInputArrive { get; set; }
         public RelayCommand FryPotThreeEmptyRollerArrive { get; set; }
         public RelayCommand LineThreeTaskExit { get; set; }
+        public RelayCommand LineThreeRecipeComSignal { get; set; }
 
         public RelayCommand AGVLThreeArrive { get; set; }
         public RelayCommand AGVFryPotThreeDownArrive { get; set; }
@@ -69,10 +70,11 @@ namespace FryPot_DosingSystem.ViewModel
         public RelayCommand AgvLineThreeLoadEmptyCom { get; set; }
         public RelayCommand CleanPlateCallAgv { get; set; }
         public RelayCommand AgvArriveCleanPlateLoc { get; set; }//下料
-        public RelayCommand AgvArriveLineFourLoc { get; set; }
-
+        public RelayCommand AgvArriveCleanPlateLocCom { get; set; }//下料完成
+        public RelayCommand AgvArriveLineFourLoc { get; set; }//下料
+        public RelayCommand AgvArriveLineFourLocCom { get; set; }//4号线空桶下料完成
         public RelayCommand AgvArriveCleanPlateLocLoad { get; set; }//上料
-
+        public RelayCommand AgvArriveCleanPlateLocLoadCom { get; set; }//上料完成
         public RelayCommand EmptyRollerCleanTaskRestart { get; set; }
         public DebugViewModel()
         {
@@ -80,7 +82,31 @@ namespace FryPot_DosingSystem.ViewModel
             {
                 ActionManage.GetInstance.Send("AgvDebug");
             }));
+            AgvArriveCleanPlateLocCom = new RelayCommand(() => 
+            {
+                ActionManage.GetInstance.Send("AgvArriveCleanPlateLocCom");
 
+            });
+            AgvArriveLineFourLocCom = new RelayCommand(() =>
+            {
+                ActionManage.GetInstance.Send("AgvArriveLineFourLocCom");
+            });
+            AgvArriveCleanPlateLocLoadCom = new RelayCommand(() =>
+            {
+                ActionManage.GetInstance.Send("AgvArriveCleanPlateLocLoadCom");
+            });
+            LineOneRecipeComSignal = new RelayCommand(() => 
+            {
+                ActionManage.GetInstance.Send("LineOneRecipeComSignal");
+            });
+            LineTwoRecipeComSignal = new RelayCommand(() =>
+            {
+                ActionManage.GetInstance.Send("LineTwoRecipeComSignal");
+            });
+            LineThreeRecipeComSignal = new RelayCommand(() =>
+            {
+                ActionManage.GetInstance.Send("LineThreeRecipeComSignal");
+            });
             EmptyRollerCleanTaskRestart = new RelayCommand(() => 
             {
 

FryPot_DosingSystem/ViewModel/FlowProcessSetViewModel.cs

@@ -27,7 +27,7 @@ namespace FryPot_DosingSystem.ViewModel
                 {
                     currnetRecipeName = recipeName.ToString();
                     var res = Json<RecipeManage>.Data.Recipes.FirstOrDefault(p => p.FlowProcess.RecipeName == recipeName.ToString());
-                    if (res != null && res is NewRecipeModel recipe) //编辑已有工艺
+                    if (res != null && res is NewRecipeModel recipe&&res.FlowProcess.fpModels.Count==res.materialCollection.Count+1) //编辑已有工艺
                     {
                         //flowProcessModels = recipe.FlowProcess.fpModels;
                         foreach (var item in recipe.FlowProcess.fpModels)
@@ -40,6 +40,10 @@ namespace FryPot_DosingSystem.ViewModel
                         var name = Json<RecipeManage>.Data.Recipes.FirstOrDefault(p=>p.RecipeName==recipeName.ToString());
                         if (name != null)
                         {
+                            if (name.FlowProcess.fpModels.Count > 0)
+                            {
+                                name.FlowProcess.fpModels.Clear();
+                            }
                             name.FlowProcess.RecipeName = recipeName.ToString();
                             flowProcessModels.Add(new FlowProcessModel { Id = Id + 1, FryMaterialNum = "油" });
                             Id++;

TestDemo/Form1.cs

@@ -11,24 +11,23 @@ namespace TestDemo
         public Form1()
         {
             InitializeComponent();
-            HubHelper.GetInstance.Connect("192.168.1.14", 8089);
         }
 
         private void button1_Click(object sender, EventArgs e)
         {
             AGVToUpSystem aGVToUpSystem = new AGVToUpSystem();
             string value = JsonConvert.SerializeObject(aGVToUpSystem);
-            string url = $"http://192.168.1.14:8089/apicallback/quicktron/robotjob/report?sign={value}";
+            string url = $"http://192.168.1.40:8089/apicallback/quicktron/robotjob/report?sign={value}";
             var res = APIHelper.GetInstance.HttpRequest(url, "", aGVToUpSystem, RequestType.POST);
         }
 
         private void button2_Click(object sender, EventArgs e)
         {
-
             Upstreamrequest aGVToUpSystem = new Upstreamrequest();
             string value = JsonConvert.SerializeObject(aGVToUpSystem);
-            string url = $"http://192.168.1.14:8089/apicallback/quicktron/robotjob/upstreamrequest?sign={value}";
+            string url = $"http://192.168.1.40:8089/apicallback/quicktron/robotjob/upstreamrequest?sign={value}";
             var res = APIHelper.GetInstance.HttpRequest(url, "", aGVToUpSystem, RequestType.POST);
+
         }
     }
 }