bpa
/
BPASmartClient
2
0
Atdalīts 0
Kods Problēmas 0 Izmaiņu pieprasījumi 0 Laidieni 0 Vikivietne Aktivitāte
Pārlūkot izejas kodu

小炒机流程优化

样式分支
taoye pirms 2 gadiem
vecāks
735db3bdde
revīzija
c2e2eb7ee3
3 mainītis faili ar 60 papildinājumiem un 50 dzēšanām
Dalītais skats
Salīdzināšanas iespējas
Rādīt statistiku Lejupielādēt ielāpa failu Lejupielādēt izmaiņu failu
  1. +54
    -47
      BPASmartClient.MorkF/Control_MorkF.cs
  2. +4
    -1
      BPASmartClient.MorkF/GVL_MorkF.cs
  3. +2
    -2
      BPASmartClient/DeviceInfo.xml

+ 54
- 47
BPASmartClient.MorkF/Control_MorkF.cs Parādīt failu

@@ -62,20 +62,18 @@ namespace BPASmartClient.MorkF
}
//流程
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T1, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.清洗槽取锅 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T2, PotActions = new List<StirFryPotAction>() { StirFryPotAction.中火持续, StirFryPotAction.加油, StirFryPotAction.搅拌臂下位, StirFryPotAction.低速旋转 }, During = 25 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T3, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
//stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T5, PotActions = new List<StirFryPotAction>() { StirFryPotAction.搅拌臂下位, StirFryPotAction.大火持续, StirFryPotAction.低速旋转 }, During = 5 });
//stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6, PotActions = new List<StirFryPotAction>() { StirFryPotAction.快速旋转 }, During = 50 });
//stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T7, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T4, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入A料 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T5, PotActions = new List<StirFryPotAction>() { StirFryPotAction.大火持续, StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 25 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T7, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入B料 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T5, PotActions = new List<StirFryPotAction>() { StirFryPotAction.大火持续, StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 15 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T8, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入C料 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T9, PotActions = new List<StirFryPotAction>() { StirFryPotAction.大火持续, StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 55 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T10, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T2, PotActions = new List<StirFryPotAction>() { StirFryPotAction.大火持续 }, During = 5 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T3, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入A料 }, PotActions = new List<StirFryPotAction>() { StirFryPotAction.加油,StirFryPotAction.搅拌臂下位, StirFryPotAction.低速旋转 }, During = 6 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T4, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止旋转, StirFryPotAction.停止火力, StirFryPotAction.搅拌臂上位 } });//加A料
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T5, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入B料 }, PotActions = new List<StirFryPotAction>() { StirFryPotAction.中火持续, StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 6 });

stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6, PotActions = new List<StirFryPotAction>() {StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });//加B料

stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T7, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入C料 }, PotActions = new List<StirFryPotAction>() {StirFryPotAction.中火持续, StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 9 });

stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T8, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });//加C料
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T9, PotActions = new List<StirFryPotAction>() {StirFryPotAction.中火持续,StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 30 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T10, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 }});
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T11, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.灶取锅 } });
}
/// <summary>
@@ -117,29 +115,28 @@ namespace BPASmartClient.MorkF
}
//流程
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T1, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.清洗槽取锅 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T2, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.搅拌臂下位, StirFryPotAction.低速旋转 }, During = 5 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T2, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入A料 }, PotActions = new List<StirFryPotAction>() { StirFryPotAction.中火持续, StirFryPotAction.搅拌臂下位, StirFryPotAction.低速旋转 }, During = 5 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T3, PotActions = new List<StirFryPotAction>() { StirFryPotAction.加油 }, During = 12 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T4, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T5, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入A料 } });

stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6, PotActions = new List<StirFryPotAction>() { StirFryPotAction.搅拌臂下位, StirFryPotAction.低速旋转 }, During = 25 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T4, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });//加A料
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6,RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入B料 }, PotActions = new List<StirFryPotAction>() { StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 25 });

stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T7, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T8, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入B料 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T9, PotActions = new List<StirFryPotAction>() { StirFryPotAction.搅拌臂下位, StirFryPotAction.低速旋转 }, During = 30 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T7, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });//加B料
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T9, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.加入C料 }, PotActions = new List<StirFryPotAction>() { StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 30 });

stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T10, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T10, PotActions = new List<StirFryPotAction>() { StirFryPotAction.停止火力, StirFryPotAction.停止旋转, StirFryPotAction.搅拌臂上位 } });//加C料
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T6,PotActions = new List<StirFryPotAction>() { StirFryPotAction.搅拌臂下位, StirFryPotAction.快速旋转 }, During = 55 });
stirFryBom.AddAction(new StirFryAction() { Time = StirFryTime.T11, RobotActions = new List<StirFryRobotAction>() { StirFryRobotAction.灶取锅 } });
}
public void TakePot()
{
WriteData("M14.0", true);
}

public void TakePotReset()
{
WriteData("M14.0", false);
}
public void TakeOff()
@@ -163,7 +160,7 @@ namespace BPASmartClient.MorkF
}
public void ThreeBlock()
{
// WriteData("M4.0", new bool[] { true, true, false, false, false, false, false, false });//0000 0001
// WriteData("M4.0", new bool[] { true, true, false, false, false, false, false, false });//0000 0001
WriteData("M4.0", new bool[] { false, true, true, false, false, false, false, false });
}
public void OverTurnOff()
@@ -415,12 +412,11 @@ namespace BPASmartClient.MorkF
TakeBurdenATask();//执行取A料操作
break;
case StirFryRobotAction.加入B料:
// TakeBurdenBTask();//执行取B料操作
TakeBurdenATask();//执行取B料操作
break;
case StirFryRobotAction.加入C料:
//TakeBurdenCTask();//执行取C料操作
TakeBurdenATask();//执行取C料操作
TakeBurdenCTask();//执行取C料操作
break;
case StirFryRobotAction.灶取锅:
OutDishTask();//执行出餐操作
@@ -458,7 +454,7 @@ namespace BPASmartClient.MorkF
KitchenAdjustGears(5);
break;
case StirFryPotAction.大火持续:
KitchenAdjustGears(6);
KitchenAdjustGears(7);
break;
case StirFryPotAction.停止火力:
KitchenAdjustGears(0);//关闭灶加热
@@ -508,6 +504,7 @@ namespace BPASmartClient.MorkF
morkF.TakePotLock = false;
morkF.PotInPlace = false;
morkF.ProcessExcuteLock = false;
morkF.SingelOrderMaterialCom = false;
}

}
@@ -642,13 +639,10 @@ namespace BPASmartClient.MorkF
{
Task.Delay(5).Wait();
}
morkF.SingelOrderMaterialCom = false;
WriteData("M14.1", false);//机器人取料完成复位
morkF.TurnTableLock = false;//转台互锁解除
while (!morkF.FallMaterialComplete)//等待倒料完成
{
Task.Delay(5).Wait();
}
MessageLog.GetInstance.Show($"订单【{ order.SuborderId}】，转台{loc}配料倒料完成");

}
/// <summary>
@@ -672,14 +666,14 @@ namespace BPASmartClient.MorkF
{
Task.Delay(5).Wait();
}
morkF.SingelOrderMaterialCom = false;
WriteData("M14.1", false);//机器人取料完成复位
morkF.TurnTableLock = false;//转台互锁解除
while (!morkF.FallMaterialComplete)//等待倒料完成
{
Task.Delay(5).Wait();
}
MessageLog.GetInstance.Show($"订单【{ order.SuborderId}】，B料倒料完成");
//while (!morkF.FallMaterialComplete)//等待倒料完成
//{
// Task.Delay(5).Wait();
//}
//MessageLog.GetInstance.Show($"订单【{ order.SuborderId}】，B料倒料完成");
}
/// <summary>
/// 取调味品C料
@@ -704,13 +698,15 @@ namespace BPASmartClient.MorkF
{
Task.Delay(5).Wait();
}
morkF.SingelOrderMaterialCom = false;
WriteData("M14.1", false);//机器人取料完成复位
morkF.TurnTableLock = false;//转台互锁解除
while (!morkF.FallMaterialComplete)
{
Task.Delay(5).Wait();
}
MessageLog.GetInstance.Show($"订单【{ order.SuborderId}】，C料倒料完成");
//while (!morkF.FallMaterialComplete)
//{
// Task.Delay(5).Wait();
//}
//morkF.SingelOrderMaterialCom = true;
//MessageLog.GetInstance.Show($"订单【{ order.SuborderId}】，C料倒料完成");
//}
}
/// <summary>
@@ -806,6 +802,17 @@ namespace BPASmartClient.MorkF
Task.Delay(5).Wait();
}
WriteData("M8.1", false);//上升完成复位
if (!morkF.SingelOrderMaterialCom)
{
WriteData("M14.3", true);//倒料
while (!morkF.FallMaterialComplete)//等待倒料完成
{
Task.Delay(5).Wait();
}
WriteData("M14.3", false);//倒料复位
morkF.SingelOrderMaterialCom = true;
MessageLog.GetInstance.Show($"订单【{ morkF.CurrentOrderId}】，配料倒料完成");
}
MessageLog.GetInstance.Show("翻转机上升完成");

}
@@ -931,7 +938,7 @@ namespace BPASmartClient.MorkF
}

WriteData("M2.7", true);//加油
WriteData("M0.7",true);//打开抽风机
WriteData("M0.7", true);//打开抽风机
MessageLog.GetInstance.Show("开始注油");
while (!morkF.FallOilComplete)
{


+ 4
- 1
BPASmartClient.MorkF/GVL_MorkF.cs Parādīt failu

@@ -169,7 +169,10 @@ namespace BPASmartClient.MorkF
/// 当前订单完成标志
/// </summary>
public bool OutMealComplete { get; set; }

/// <summary>
/// 单个订单取料结束
/// </summary>
public bool SingelOrderMaterialCom { get; set; }
}
}


+ 2
- 2
BPASmartClient/DeviceInfo.xml Parādīt failu

@@ -38,7 +38,7 @@
</Peripherals>
</Device>

<Device Name="Morks" Module="BPASmartClient.MorkS.Control_Morks" DeviceId="28">
<!--<Device Name="Morks" Module="BPASmartClient.MorkS.Control_Morks" DeviceId="28">
<Peripherals>
<Peripheral Module="BPASmartClient.PLC.MorksMachine">
<Parameters>
@@ -48,6 +48,6 @@
</Parameters>
</Peripheral>
</Peripherals>
</Device>
</Device>-->

</BPADevices>

Rakstīt Priekšskatītījums
Notiek ielāde…
Atcelt
Saglabāt