syntax = "proto3";

package robotc;

message Response {
  int32 ret = 1;
}

message Coordinate {
  double x = 1;
  double y = 2;
  double z = 3;
}

message Rotation {
  double r = 1;
  double p = 2;
  double y = 3;
}

message PR {
  Coordinate position = 1;
  Rotation rotation = 2;
}

message JPose {
  repeated double joints = 1;
}

message Payload { // 末端负载
  double mass = 1; // 质量, default: 0
  Coordinate cog = 2; // 质心，Center of gravity, default: 0
}

message PayloadMass {
  double mass = 1;
}

message PayloadCog {
  Coordinate cog = 1;
}

message IOPin { int32 pin = 1; }

message DIO {
  int32 pin = 1;
  int32 value = 2;
}

message AIO {
  //提供给用户做操作的地址
  int32 pin = 1;
  //电流环或电压环
  int32 mode = 2;
  double value = 3;
}

message ModbusExternalIOState {
    //设备ID
    int32 id = 1;
    //0表示断开，1表示连接成功
    int32 state = 2;
}
//xxx
message IO {
  // 所有数字量的输入值
  repeated DIO robotDIOIn = 1;
  // 所有数字量的输出值
  repeated DIO robotDIOOut = 2;
  // 所有模拟量输入值
  repeated AIO robotAIOIn = 3;
  // 所有模拟量输出值
  repeated AIO robotAIOOut = 4;
  // 所有tcp数字量的输入值
  repeated DIO tcpDIOIn = 5;
  // 所有tcp数字量的输出值
  repeated DIO tcpDIOOut = 6;
  //modbus的状态信息
  repeated ModbusExternalIOState extIODevices = 7;
  // 所有扩展数字量的输入值
  repeated DIO extra_robotDIOIn = 8;
  // 所有扩展数字量的输出值
  repeated DIO extra_robotDIOOut = 9;
  // 所有扩展模拟量输入值
  repeated AIO extra_robotAIOIn = 10;
  // 所有扩展模拟量输出值
  repeated AIO extra_robotAIOOut = 11;
}

message Hardware {
  string model = 1;
  string sn = 2;
  string driver_version = 3; // 作为传入参数时无意义
}

message RobotInfo {
  Hardware robot = 1; // 机器人型号在 robot.model 里
  Hardware flange = 2;
  Hardware led = 3;
  repeated Hardware joints = 4;
  string rcVersion = 5; // 作为传入时无意义
  string name = 6; // 机器人默认名称
  Hardware comboard = 7; // 主控板
  string mac = 8; // 机械臂整机ID号
  Hardware arm = 9; // 主机箱
  string appTag = 10; // release cfqmp simulate joint circuit
  string typeTag = 11; // debug release
  bool extra_io = 12;
  //xxx
}

message DeviceInfo {
  Hardware devInfo = 1; // 主控板
  //2表示通信板、3表示法兰、4表示灯板、5表示关节板
  int32 dev_type = 2;
}

enum LuaState {
  IDLE = 0;
  RUNNING = 1;
  PAUSED = 2;
  ABORTED = 3; // Error 
  STOPPED = 4; // Stop
  BEGIN = 5;
  END = 6;
};