BPASmartClient/BPASmartClient.MorkS/GVL_MORKS.cs

using BPASmartClient.Device;
using BPASmartClient.Model;
using System;
using System.Collections.Concurrent;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;

namespace BPASmartClient.MorkS
{
    public class GVL_MORKS : IStatus
    {
        /// <summary>
        /// 机器人取面
        /// PLC -> M0.3
        /// ModbusTcp -> 323
        /// </summary>
        public bool RobotTakeNoodle { get; set; }

        /// <summary>
        /// 机器人出餐
        /// PLC -> M0.4
        /// ModbusTcp -> 324
        /// </summary>
        public bool RobotOutMeal { get; set; }

        /// <summary>
        /// 移动转台
        /// PLC -> M0.5
        /// ModbusTcp -> 325
        /// </summary>
        public bool MoveTurntable { get; set; }


        #region 临时变量
        /// <summary>
        /// 允许运行
        /// </summary>
        //[Circuit(new string[] { "机器人取面", "取碗控制" }, "允许运行")]
        [VariableMonitor("允许运行")]
        public bool AllowRun { get; set; }

        /// <summary>
        /// //机器人任务互锁信号
        /// </summary>
        //[Circuit(new string[] { "机器人取面", "出面控制" }, "机器人互锁", new bool[] { true, false })]
        [VariableMonitor("机器人任务互锁信号")]
        public bool RobotTaskInterlock { get; set; }

        /// <summary>
        /// 取碗互锁信号
        /// </summary>
        //[Circuit("取碗控制", "取碗互锁", true)]
        [VariableMonitor("取碗互锁信号")]
        public bool TakeBowlInterlock { get; set; }

        /// <summary>
        /// 取面互锁信号
        /// </summary>
        //[Circuit(new string[] { "机器人取面", "出面控制" }, "取面互锁信号", new bool[] { true, true })]
        [VariableMonitor("取面互锁信号")]
        public bool TakeNoodleInterlock { get; set; }

        /// <summary>
        /// 出面中
        /// </summary>
        //[Circuit("机器人取面", "出面中", true)]
        [VariableMonitor("出面中")]
        public bool OutNoodleing { get; set; }

        /// <summary>
        /// 允许取面
        /// </summary>
        //[Circuit(new string[] { "转台控制", "机器人取面" }, "允许取面", new bool[] { true, false })]
        [VariableMonitor("允许取面")]
        public bool AllowTakeNoodle { get; set; }

        /// <summary>
        /// 转台互锁信号
        /// </summary>
        [VariableMonitor("转台互锁信号")]
        public bool TurntableInterlock { get; set; }
        #endregion


        /// <summary>
        /// 初始化完成
        /// PLC -> M100.0
        /// ModbusTcp -> 1120
        /// </summary>
        //[Circuit(new string[] { "允许运行", "转台控制", "转台控制" }, "初始化完成")]
        [VariableMonitor("初始化完成", "M100.0", "1120")]
        public bool InitComplete { get; set; }

        /// <summary>
        /// 取碗机构空闲，True:忙碌，false:空闲
        /// PLC -> M100.1
        /// ModbusTcp -> 1121
        /// </summary>
        //[Circuit("取碗控制", "取碗机构空闲", true)]
        [VariableMonitor("取碗机构空闲", "M100.1", "1121")]
        public bool TakeBowlIdle { get; set; }

        /// <summary>
        /// 温度到达,True:表示到达，false：未到达
        /// PLC -> M100.2
        /// ModbusTcp -> 1122
        /// </summary>
        //[Circuit("允许运行", "温度到达")]
        [VariableMonitor("温度到达", "M100.2", "1122")]
        public bool TemperatureReached { get; set; }

        /// <summary>
        /// 允许到面,配料完成
        /// PLC -> M100.3
        /// ModbusTcp -> 1123
        /// </summary>
        //[Circuit("出面控制", "允许到面")]
        [VariableMonitor("允许到面", "M100.3", "1123")]
        public bool AllowFallNoodle { get; set; }

        /// <summary>
        /// 机器人取面完成
        /// PLC -> M100.4
        /// ModbusTcp -> 1124
        /// </summary>
        [VariableMonitor("机器人取面完成", "M100.4", "1124")]
        public bool RbTakeNoodleComplete { get; set; }

        /// <summary>
        /// 机器人倒面完成
        /// PLC -> M100.5
        /// ModbusTcp -> 1125
        /// </summary>
        [VariableMonitor("机器人倒面完成", "M100.5", "1125")]
        public bool RbFallNoodleComplete { get; set; }

        /// <summary>
        /// 机器人出餐完成,上报取餐完成
        /// PLC -> M100.6
        /// ModbusTcp -> 1126
        /// </summary>
        [VariableMonitor("机器人出餐完成", "M100.6", "1126")]
        public bool RbOutMealComplete { get; set; }

        /// <summary>
        /// 机器人空闲
        /// PLC -> M100.7
        /// ModbusTcp -> 1127
        /// </summary>
        //[Circuit(new string[] { "机器人取面", "出面控制" }, "机器人空闲")]
        [VariableMonitor("机器人空闲", "M100.7", "1127")]
        public bool RobotIdle { get; set; }

        /// <summary>
        /// 取餐口检测
        /// PLC -> M101.0
        /// ModbusTcp -> 1128
        /// </summary>
        //[Circuit("出面控制", "取餐口检测", true)]
        [VariableMonitor("取餐口检测", "M101.0", "1128")]
        public bool TakeMealDetect { get; set; }

        /// <summary>
        /// 缺碗信号，false:缺碗，true:有碗
        /// PLC -> M101.1
        /// ModbusTcp -> 1129
        /// </summary>
        [VariableMonitor("缺碗信号", "M101.1", "1129")]
        public bool MissingBowl { get; set; }

        /// <summary>
        /// 设备初始化中，执行中等于1,2秒后复位
        /// PLC -> M101.2
        /// ModbusTcp -> 1130
        /// </summary>
        [VariableMonitor("设备初始化中", "M101.2", "1130")]
        public bool DeviceIniting { get; set; }

        /// <summary>
        /// 转台下限检测
        /// PLC -> M101.3
        /// ModbusTcp -> 1131
        /// </summary>
        //[Circuit("转台控制", "转台下限检测有物料")]
        [VariableMonitor("转台下限检测", "M101.3", "1131")]
        public bool TurntableLowerLimit { get; set; }

        /// <summary>
        /// 缺碗信号 2
        /// PLC -> M101.4
        /// ModbusTcp -> 1132
        /// </summary>
        [VariableMonitor("缺碗信号 2", "M101.4", "1132")]
        public bool MissingBowlSignal2 { get; set; }

        /// <summary>
        /// 转台上限检测
        /// PLC -> M101.5
        /// ModbusTcp -> 1133
        /// </summary>
        [VariableMonitor("转台上限检测", "M101.5", "1133")]
        public bool TurntableUpLimit { get; set; }

        /// <summary>
        /// 补料完成
        /// PLC -> M101.6
        /// ModbusTcp -> 1134
        /// </summary>
        [VariableMonitor("补料完成", "M101.6", "1134")]
        public bool FeedComplete { get; set; }

        /// <summary>
        /// 转台移动到位
        /// PLC -> M101.7
        /// ModbusTcp -> 1135
        /// </summary>
        //[Circuit(new string[] { "转台控制", "机器人取面" }, "转台移动到位")]
        [VariableMonitor("转台移动到位", "M101.7", "1135")]
        public bool TurntableMoveInPlace { get; set; }

        /// <summary>
        /// 煮面炉状态,True:忙碌，false:空闲
        /// M102.0 - M102.5
        /// 1136   - 1141
        /// </summary>
        [VariableMonitor("煮面炉状态", "M102.0", "1136")]
        public bool[] NoodleCookerStatus { get; set; } = new bool[6] { false, false, false, false, false, false };

        /// <summary>
        /// 补料中
        /// M102.6
        /// 1142
        /// </summary>
        [VariableMonitor("补料中", "M102.6", "1142")]
        public bool Feeding { get; set; }

        /// <summary>
        /// 煮面完成,上升后给信号
        /// M103.0 - M103.5
        /// 1144   - 1149
        /// </summary>
        [VariableMonitor("煮面完成", "M103.0", "1144")]
        public bool[] CookNoodlesComplete { get; set; } = new bool[6] { false, false, false, false, false, false };

        /// <summary>
        /// 硬件设备异常
        /// PLC -> M235.0
        /// True:设备正常，False:设备异常
        /// </summary>
        [VariableMonitor("硬件设备异常", "M235.0", "")]
        public bool Error { get; set; } = false;

        /// <summary>
        /// 配方编号
        /// PLC -> VW0
        /// ModbusTcp -> 100
        /// </summary>
        [VariableMonitor("配方编号", "VW0", "100")]
        public ushort RecipeNumber { get; set; }

        /// <summary>
        /// 转台设置位置
        /// PLC -> VW2
        /// ModbusTcp -> 101
        /// </summary>
        [VariableMonitor("转台设置位置", "VW2", "101")]
        public ushort TurntableLoc { get; set; }

        /// <summary>
        /// 到面至煮面炉位置
        /// PLC -> VW4
        /// ModbusTcp -> 102
        /// </summary>
        [VariableMonitor("到面至煮面炉位置", "VW4", "102")]
        public ushort FallNoodleLoc { get; set; }

        /// <summary>
        /// 取面位置
        /// PLC -> VW6
        /// ModbusTcp -> 103
        /// </summary>
        [VariableMonitor("取面位置", "VW6", "103")]
        public ushort TakeNoodleLoc { get; set; }

        /// <summary>
        /// 转台反馈位置
        /// PLC -> VW372
        /// ModbusTcp -> 286
        /// </summary>
        [VariableMonitor("转台反馈位置", "VW372", "286")]
        public ushort TurntableFeedbackloc { get; set; }

        /// <summary>
        /// 机器人取面位置队列
        /// </summary>
        //[Circuit(new string[] { "转台控制", "机器人取面" }, "有机器人取面队列")]
        public ConcurrentQueue<OrderLocInfo> RBTakeNoodleTask { get; set; } = new ConcurrentQueue<OrderLocInfo>();

        /// <summary>
        /// 出碗队列
        /// </summary>
        //[Circuit("取碗控制", "有取碗队列数量")]
        public ConcurrentQueue<OrderLocInfo> TakeBowlTask { get; set; } = new ConcurrentQueue<OrderLocInfo>();

        public List<DoOrderEvent> doOrderEvents { get; set; } = new List<DoOrderEvent>();

        /// <summary>
        /// 是否有面条
        /// </summary>
        public bool IsNoodles { get; set; } = true;



        #region 订单ID记录
        /// <summary>
        /// 取碗订单ID
        /// </summary>
        public string TakeBowlId = string.Empty;

        /// <summary>
        /// 配料完成订单ID
        /// </summary>
        public string IngredientsCompleteId = string.Empty;

        /// <summary>
        /// 煮面口对应的订单ID
        /// </summary>
        public string[] CookNodelId = new string[6] { string.Empty, string.Empty, string.Empty, string.Empty, string.Empty, string.Empty, };

        /// <summary>
        /// 出餐订单ID
        /// </summary>
        public string OutMealId = string.Empty;

        /// <summary>
        /// 转台位置轮询
        /// </summary>
        public List<ushort> TurntableLocLists = new List<ushort>();

        /// <summary>
        /// 转台当前启动位置
        /// </summary>
        [VariableMonitor("转台当前启动位置")]
        public ushort CurrentLoc { get; set; } = 0;

        #endregion
    }
}